The Signature i66 speaker is beautifully crafted to the highest standard in finely finished genuine timber veneers and weigh in at an impressive 60kg.
Featuring a time-aligned partially vertically symmetrical driver array, the VAF Signature i66 is a large, floor standing four driver, three way speaker. Each cabinet contains one 210mm woofer and two 130mm magnesium alloy cone midrange drivers symmetrically arrayed about a single 25mm double chamber Magnesium dome tweeter.
Each woofer cone is constructed of composite hard paper pulp embedded with carbon and Kevlar fibres which are individually treated with an anti-resonant natural fibre. Each midrange cone is precisely and individually machined from forged magnesium alloy for the most detailed resolution and midrange performance of any loudspeaker driver manufactured.
Both the woofers and the midrange drivers have low distortion, long linear throw motor systems. They employ precision engineered copper shorting rings, both in front of and behind the forward magnetic pole plate. Solid copper phase correction plugs are embedded within large, double layer voice coils.
Copper coated magnetic circuits are also used to eliminate induced eddy currents, so that even these often ignored minor effects do not intrude or contaminate the sound.
The tweeter is also unique, comprising a 25mm pure silver voice coil driving a proprietary Magnesium dome backed by it’s own anti-resonant acoustic chamber.
All drivers are time aligned to optimise phase and impulse responses, and therefore maintain exact spatial recreation of the original sound wave front as it was recorded.
Optimised internal damping is provided by VAF’s advanced HyperSoft material, to effectively eliminate internal cabinet reflections and standing waves.
An obvious and integral design feature on every VAF loudspeaker is natural, acoustically absorbent fibre pads. These are fitted around each tweeter and midrange driver to accurately control dispersion and effectively eliminate diffraction effects.
Manufactured from only first grade MDF up to 48mm thick, cabinet construction is highly detailed. Precisely fully mitred joints and substantial internal cross-bracing characterise the superior quality of these loudspeakers.
Finishes include very high quality piano gloss or satin lacquer on crown cut, book-matched, genuine timber veneers including Australian Jarrah, Cherry, Black Oak and American Oak. A black lacquer in satin or piano gloss finish is also offered at extra cost. All of our speakers are made here in Australia, as such custom and bespoke finishes are available on request.
|Frequency Range 25Hz ~ 21kHz|
|Frequency Response 35Hz ~ 20kHz (±1.5dB)|
|Phase Response ±15° (100Hz ~ 20kHz)|
|Impedance 6 ohms (nominal)|
|Sensitivity 89dB (2.83V / 1m)|
|Amplifier Power up to 200W (recommended)|
|Dimensions 250mm (W) × 1125mm (H) × 392mm (D)|
|Weight 60kg (Net) each|
|Finishes American Cherry. Australian Jarrah. Black Oak. Piano Black. Piano Palisander. Tasmanian Blackwood.|
|Sold As: Pair.|
Made To Order
This is a general guideline and a VAF staff member will be in contact with you about the delivery of your speaker order.
VAF Speakers and Subwoofer are hand made and come in many different models, variations and finishes, while VAF hold stock of some items, many are made to order and delivery time is between 6-8 weeks.
Please note this delivery timeframe may vary due to high demand or promoted sale activity, occasionally resulting in delayed shipment. you will be notified of any delays.
If you require more information pertaining to the delivery of VAF speakers, please contact us via the freecall number or via email.
ABOUT THIS WEBSITE
COPYRIGHT AND TRADEMARKS
Copyright in the Content on the VAF Website is owned or licensed by VAF Research. Except where necessary for and incidental to viewing the Content on the VAF Website via your web browser, or as permitted under the Copyright Act 1968 or other applicable laws, no Content on the VAF Website may be reproduced, stored in an electronic or other retrieval system, adapted, uploaded to a third party location, framed, performed in public or transmitted in any form by any process whatsoever without our specific written consent.
LINKS TO OTHER WEBSITES
The VAF Website may contain links to websites which are owned and operated by third parties independent of us (Third Party Websites). We do not sponsor, endorse or approve of the operators of Third Party Websites or the information, graphics and material which may be found at Third Party Websites (Third Party Material). Subject to any applicable law which cannot be excluded, we make no warranties or representations:
We are not authorising the reproduction of Third Party Material by linking material on this Website to Third Party Material. All offers to sell and statements relating to goods and services available on Third Party Websites are the responsibility of and given by the Third Party Website operators. Insofar as such offers and statements are made on the VAF Website, such offers and statements are made by us on behalf of the Third Party Website operators. We expressly disclaim acting in any other respect on behalf of Third Party Website operators.
ASSESSMENT TOOLS AND OTHER FEATURES
LIMITATION OF LIABILITY
LINKING TO VAF.COM.AU
We encourage linking to the VAF website. Please contact VAF Research if you would like to link to any part of the VAF Website.